K7VT2 BIOS DRIVER

Make sure to unplug the power cord before installing or removing the motherboard. MAIN Use this menu to make changes to the basic system configuration. Replace the system cover. Installation of Heatsink and CPU fan The AGP slot is used to install a graphics card. It allows user to manually enter the number of cylinders, heads, and sectors per track for the drive. Incorrect settings may cause the system to fail to recognize the installed hard disk.

Uploader:	Zujas
Date Added:	13 December 2010
File Size:	30.81 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	36365
Price:	Free* [*Free Regsitration Required]

Use keys to move between the Month, Day and Year fields. Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card. The default is 4X. The AGP slot is used to install a graphics card.

Sector This field configures the number of sectors per track. Fasten the card to the chassis with screws.

Click on a specific item then follow the installation wizard to install it. Doing so may damage the motherboard. Step 1 Step 2, 3 Step 4 2. The default is 5.

However, this is not recommended unless you thoroughly knows the feature. It's a community-based project which helps to repair anything.

ASROCK K7VT2 User Manual: Bios Setup; Bios Setup Utility; Bios Menu Bar; Legend Bar

Supervisor password has been set. This automatically activates the Numeric Lock function after boot up. Make sure to unplug the power cord before installing or removing the motherboard.

If this screen is disabled, only ASRock logo is shown during the boot up process. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. This loads bioa default values for all setup options.

This allows you to set the power state when the AC power restore from the previous AC power loss.

Amptron / Asrock K7VT2 1.30 motherboard BIOS - AM6LVA91

The default is 1. Please check if the CPU fan on the motherboard functions properly before you resume the system. Select [Auto] to automatically detect hard disk drive. Connect an ATX power supply to the connector.

ASROCK K7VT2 User manual |

Use this to select Midi IRQ. Select address for Midi Port or disable Midi Port.

This is necessary so that you can write or read data from the hard disk. The following table lists the keys found in the legend bar with their corresponding functions. Whenever you uninstall any component, place it on a grounded antistatic pad or in the buos that comes with the component.

Specifications and information contained in this manual are furnished for informational use only bos subject to change without notice, and should not be constructed as a commitment by ASRock. Remove the system unit cover if your motherboard is already in stalled in a chassis. If the hard disk was already formatted on an older system, BIOS Setup may detect incorrect parameters.

The CPU fits only in one correct orientation. Before you install the motherboard, study the k7bt2 of your chassis to ensure that the motherboard fits into it.

Download Amptron K7VT2 BIOS v Amptron K7VT2

No password has been set. With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

Use keys to move between the Hour, Minute and Second fields. When the menu appears, the hard disk drive field displays the size for the hard disk drive that you configured.